▾Trusspole

A stackable moss pole for climbing plants. Change the settings and the model renders again.

Made to fit the moss pole as set on its tab: its default settings. Change it

Moss pole as printed

Printed with headroom Whether the ring has the 2 mm of headroom over the heads (11 mm thick), or is the earlier 9 mm ring

Lid

Lid outside Put the lid on the outside of the struts; otherwise it sits behind them

Lid wall mm Thickness of the lid

Lid gap mm Room between the lid and the struts, poles and pipe

Clips

Clips per strut Clips on each strut that crosses the column

Clip wrap ° How far a clip wraps round its strut, from the lid under it to the lip over its far side; over 180 the strut snaps in

Clip wall mm Thickness of the clips

Clip length mm Length of a clip, measured level

Clip gap mm Room between a clip and its strut

Max overhang ° Steepest overhang the printer manages, from the vertical